NORTH Milk Frother Black Steel, 4 functions, hot and cold foam

How to use

1. Before first use: wash the inside of the jug, the lid and the rings as described under cleaning.
2. Place the power base on a flat, dry surface and plug it in.
3. Remove the lid. Fit the foam ring on the pin in the bottom of the jug if you want foam. If you only want to heat the milk, use the heating ring.
4. Pour cold milk straight from the fridge into the jug. For foam: no higher than the lower MAX mark (approx. 110 ml). For hot milk: no higher than the upper MAX mark (200 ml). Always fill to at least the MIN mark.
5. Put the lid on and place the jug on the power base.
6. Press the button: 1 press = thick hot foam, 2 presses in a row = light hot foam, 3 presses = hot milk, 4 presses = cold foam.
7. The frother stops by itself when it is done. You can stop it at any time by pressing the button or lifting the jug off the base.
8. Pour the milk into your coffee. Unplug and let the jug cool down before cleaning it.

Questions and answers