NORTH Rechargeable Milk Frother with USB-C, 3 speeds, double whisk

How to use

1. Fully charge the milk frother before first use. Plug the USB-C cable into the socket at the top of the handle and connect it to a 5 V USB adapter. The charging light is on while charging and goes out when the battery is full (approx. 2.5 hours).
2. Unplug the cable and remove the protective cover from the whisk.
3. Pour milk into a tall mug or milk jug. Leave plenty of room, as the foam takes up more space than the milk.
4. Hold the whisk down in the milk before you start, so it does not splash.
5. Press the button once: the frother starts at speed 1 and light 1 comes on. Press again for speed 2 (lights 1 and 2) and again for speed 3 (lights 1, 2 and 3).
6. Press a fourth time to stop. You can also stop at any speed by holding the button down. Use it for no more than 3 minutes at a time.
7. Clean the whisk straight away: dip it in a mug of water and let the frother run for a moment. Do not rinse the handle under the tap or put it in water. Dry the whisk and put the protective cover back on.

Questions and answers